[2SStoZR2]

Lamin-X? Thinking of doing same on my Canyon AT4.

sorry about the delay Scott. Yeah, the fog lights tint is from Lamin-X. They show for the 23 and 24 Colorado’s, but had to trim a lot off, to fit the ZR2 fogs.

 

[2SStoZR2]

Finally got around to doing some of the little stuff that I’ve been putting off.

After seeing others wrapping the piano black center console, I ordered some satin gray film. Once it came in, didn’t like the look. Ended up deciding to scuff it up and spray with some Matte Clear Coat. Wasn’t sure how it would turn out, but very happy with it.

 

[2SStoZR2]

Next up was dealing with the flo-tie and skid plate. Had planned on painting the skid plate with some Herculiner.

After going back and forth, I decided against the black, and went with some Dark Shadow Gray paint, same color I did my Camaro’s flo-tie a few years back.

This keeps the contrast between the skid plate, and the rest of the black trim. Still has the same effect as stock, but toned down a bit.

 

[gherbert]

Next up was dealing with the flo-tie and skid plate. Had planned on painting the skid plate with some Herculiner.

After going back and forth, I decided against the black, and went with some Dark Shadow Gray paint, same color I did my Camaro’s flo-tie a few years back.

This keeps the contrast between the skid plate, and the rest of the black trim. Still has the same effect as stock, but toned down a bit.

View attachment 464490
View attachment 464491
View attachment 464492
View attachment 464493

Looks Nice

 

[PuraVidaColorado]

Finally got around to doing some of the little stuff that I’ve been putting off.

After seeing others wrapping the piano black center console, I ordered some satin gray film. Once it came in, didn’t like the look. Ended up deciding to scuff it up and spray with some Matte Clear Coat. Wasn’t sure how it would turn out, but very happy with it.

View attachment 464476
View attachment 464477
View attachment 464478 View attachment 464479

How hard was it to take off?

 

[2SStoZR2]

Very easy. Just lift up the rubber phone pad a couple inches, then grab the top of the plastic panel and pull straight up. It just pops off.

Here's a pic to show where the clips pop in.

 

[2SStoZR2]

Here's a video of someone doing it.

About the 1:37 mark

 

[2SStoZR2]

Installed some EGR Window Visors and took the fam up to the snow for a couple hours on Easter morning. Headed back home to crush some good food, and take a nappy 👍

 

[PuraVidaColorado]

Here's a video of someone doing it.

About the 1:37 mark

Very helpful Thank You

 

[actionhero86]

Finally got around to doing some of the little stuff that I’ve been putting off.

After seeing others wrapping the piano black center console, I ordered some satin gray film. Once it came in, didn’t like the look. Ended up deciding to scuff it up and spray with some Matte Clear Coat. Wasn’t sure how it would turn out, but very happy with it.

View attachment 464476
View attachment 464477
View attachment 464478 View attachment 464479

Would you be able to post a link to whatever you used for the Matte Clear Coat, because that looks so good and I need to do it now.

 

[2SStoZR2]

I scuffed the surface very lightly with a scotch pad, then wiped it down with some isopropyl alcohol. Sprayed 4-5 light coats of the clear. Good luck 👍

 

[KelownaZR2]

Finally got around to doing some of the little stuff that I’ve been putting off.

After seeing others wrapping the piano black center console, I ordered some satin gray film. Once it came in, didn’t like the look. Ended up deciding to scuff it up and spray with some Matte Clear Coat. Wasn’t sure how it would turn out, but very happy with it.

View attachment 464476
View attachment 464477
View attachment 464478 View attachment 464479

That looks amazing! 🙌 You should do a "How to" on this.

 

[PuraVidaColorado]

Finally got around to doing some of the little stuff that I’ve been putting off.

After seeing others wrapping the piano black center console, I ordered some satin gray film. Once it came in, didn’t like the look. Ended up deciding to scuff it up and spray with some Matte Clear Coat. Wasn’t sure how it would turn out, but very happy with it.

View attachment 464476
View attachment 464477
View attachment 464478 View attachment 464479

Decided to wrap it not sure I like it thou.

 

[PuraVidaColorado]

Decided to wrap it not sure I like it thou.

Did it in a different color. Looks so much nicer. Matches great with the rest of the interior.

 

[Xcanuk]

Did it in a different color. Looks so much nicer. Matches great with the rest of the interior.

Looks better to me, but I usually prefer solud vs patterns

 

[BNeal]

Did it in a different color. Looks so much nicer. Matches great with the rest of the interior.

That looks awesome. Nice work!

 

[2SStoZR2]

Did it in a different color. Looks so much nicer. Matches great with the rest of the interior.

Awesome job, came out great 👍

 

[Ruthless_obsession]

Can I get a link to the window rain guards? I'm also planning to try wrapping the black hood scoop/cowel and mirrors, if it comes out like I'm hoping I'll be doing the black part of the grill also.

 

[2SStoZR2]

Can I get a link to the window rain guards? I'm also planning to try wrapping the black hood scoop/cowel and mirrors, if it comes out like I'm hoping I'll be doing the black part of the grill also.

Here you go. Make sure to post up when you're done wrapping.

https://imp.i128439.net/c/404739/79...ttps://realtruck.com/p/egr-matte-black-in-channel-window-deflectors/egr-571481/

 

[2SStoZR2]

Listing the truck for sale in the classified section.

$46,500 located in San Diego

3,500 miles