This may help you?

 

May also want to try a search on this forum.

 

 

ABS Stabilitrack Codes C0035 C0040 Bearing Hub Assembly ...
coloradofans.com
https://www.coloradofans.com › threads › abs-stabilitra...







ABS advise needed: Please! | Chevy Colorado & GMC Canyon
Dec 17, 2022
Search Results for 'wheel speed sensor'
Nov 10, 2020
More results from www.coloradofans.com

 

Wheel Speed Sensor might fix it (Might have to replace the Wheel Bearing

 

Changed all 4 sensors…. Nothing. Car drives terrible like the brakes are locking up. It’s really bad at slow speeds when turning???

 

Did you check the hub?

 

To do that jack the car up see if there’s play in the wheel? And do it to all 4?

 

One of the possible causes may be broken wiring beneath the insulation on either/both of the wheel speed sensors. You state that this can sometimes occur while turning, and that's an important clue. When the signal from the sensors is interrupted (wire break, bad connection, intermittent sensor, etc.), the control module interprets this as a locked wheel, and takes countermeasures, such as activating the ABS function for that wheel.
If an intermittent connection exists in the wiring, turning the wheels and bending the wire can set off the fault. A visual inspection may not be conclusive, because the strands of the wires may be broken beneath the insulation, and everything may appear normal. You'll need to disconnect connectors and use a ohmmeter to check continuity while flexing the wires at the areas that are known to move when the suspension moves.

 

Also I don’t know if this helps at all but my tire pressures are not showing now. Which is kind of weird.

 

You may need to reprogram the tire sensors. Not sure why they are not showing.

I know I just reprogrammed my tire sensors and screwed up. Lost the data and had to start over.

 

I can see the broken section of magnet!!! Replacing the hub. Although idk how this made the drivability so terrible or how it will automatically make it drive perfect again?

 

The Magnet tells the Computer your Wheel Speed
That helps ABS and Traction Control

Your truck might be appling Brakes when there is no need

 

can i get away with duralast parts from autozone or should i order them and get the acdelco?

 

I quality aftermarket should work fine

 

Thanks everyone hopefully have it fixed tomorrow!

 

Hope it all works out well
Keep us updated

 

It’s up to you but I prefer to stick with the oem products.

I do like the moog products too.

 

All fixed!! Thanks again everyone!

 

Glad to hear it is all fixed

 

Guess your hub was the problem?

 

Yes the magnet broke so a new hub was just the ticket!!

 

Yes I did! All done, no codes, good to go! Thank you for all the help!!!

 

I have the same codes and symptoms, was C0035 the drivers side front hub?

 

Hello. I know there a few posts about this code - C0035. I tried to find the most recent. I have the same code and warning lights about ABS, Tractions control etc but it only happens when I'm in the highway and hit approx 60mph. The warning lights will stay on while driving. If stop driving for the day and let it sit overnight and drive around town the next day...no warning lights. It will only come back when I;m back on the highway and hit 60. Is this the hub or sensor wire?
Thanks.