Chevy Colorado & GMC Canyon banner
  • Hey Everyone! Enter your ride HERE to be a part of this months Ride of the Month Challenge!
1 - 4 of 4 Posts

·
Registered
Joined
·
3,827 Posts
Or a scrap piece of rubber gas line or other hose. Slip it over the bulb and pull it right out of those cramped little light housings. About 3/8: ID works well. I keep one in my electrical tool box.
 

·
Registered
Joined
·
166 Posts
I have changed to LED's on all Bulbs on my 2017 Colorado Z71 that does not require Load Resistors.
I just pulled out with my fingers, not going back in anyway, went in the Trash.

Keith
Marietta, GA
 

·
Registered
Joined
·
739 Posts
I have changed to LED's on all Bulbs on my 2017 Colorado Z71 that does not require Load Resistors.
I just pulled out with my fingers, not going back in anyway, went in the Trash.

Keith
Marietta, GA
I did the same for a year and a half, everything easy to change was changed right when I got it. Over the weekend I went ahead and put switchbacks in the front with load resistors and it was very much so worth it.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top