[Bison2021]

Does anyone know where to get this switch pod for a 2021 Bison? In this YouTube video the guy says, “AEV has this cool switch pod…” but I can’t find the thing to save my ass… and I can’t shoot him a comment to find it.
Any help would be appreciated…
Scott

 

[Hunter62]

check this one out, similar

S-TECH 4 Toggle Switch System

*ONLY FITS MODELS WITH HEATED SEATS* - For ones without heated seats, please see S-TECH 6 Switch System *GAS AND DIESEL ARE NOW THE SAME UNIT* BREAKER & LOW VOLTAGE CUT OFF IS NOW INCLUDED AS STANDARD The S-TECH Switch Systems™ 4 Switch System designed specifically for the Chevy Colorado & GMC...

coloradocanyonenthusiasts.com

 

[ARCowboy]

Does anyone know where to get this switch pod for a 2021 Bison? In this YouTube video the guy says, “AEV has this cool switch pod…” but I can’t find the thing to save my ass… and I can’t shoot him a comment to find it.
Any help would be appreciated…
Scott


View attachment 440853 View attachment 440852

That was either an AEV concept that didn't make it to production or something unrelated to AEV/GM.

I put an SP9100 there and am quite happy with it. I think it looks almost OEM and it gives me 8 different ones.

If you're interested, I posted about it here:

How To: Switch Pros 9100, Power Tray, Blue Sea Systems...

All, Here is a How-To on how I built/installed my SP9100 on a PowerTray blank with some Blue Sea Systems components. My decision to mount the SP9100 vertically caused me to have to trim a small piece of metal with aviation snips, but otherwise it's 100% bolt on. Obligatory not affiliated with...

www.coloradofans.com

 

[Bison2021]

Your mod is very nice. And yeah, I think you’re correct about not production… The guy states it was AEV but in looking closer the switch alignment suggests it is not factory… Not downing the work but it’s just not perfect…

But the switches had led rings which were really nice and certainly must help to see them in that lower pocket with min light otherwise.

I opted for the option like yours but mounted in between the left vent and speedo cluster as I can just extend my fingers from the wheel to turn the lights on… Notched the inner vent ring to run the flat cable through - it works well and both easy to access and keeps eyes up towards road…

Scott