Chevy Colorado & GMC Canyon banner
  • Hey Everyone! Enter your ride HERE to be a part of this months Ride of the Month Challenge!
1 - 1 of 1 Posts

·
Registered
Joined
·
23 Posts
Tapping signal won't affect the speakers as long as you don't completely cut the wire. For remote you can go to the fuse box on the passenger side. There is a fuse that lets you decide if you want constant or keyed cig lighter plugs. Move the fuse to the top two. Attach a spade and fuse to remote wire (See picture). You can find a factory ground under the carpet in front of the passenger seat. I would suggest getting a line driver (Audicontrol LC2i) instead of a cheap LOC to fix bass roll off from the factory deck. If it were me i would go behind the deck for signal. there is room for the line driver and wires are easy to find.
 

Attachments

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top