[choneofakind]

So my buddy got his racecar back from a shop that redid all his wiring for him. It's amazing, but that's another story. Anyhow. We didn't clear his driveway/shop out before getting excited and unloading his trailer after work. It doesn't run, so it's not like we could just drive it up his hill. Had to give it a little tow up the hill to get to a flatter spot where we could park it while we cleared out his shop. :grin2:

 

[madcratebuilder]

I was the same way! At first, I laughed at it when @589FAB bought his and said I'd never run one because it wasn't for me, but then I really started to like it, especially after using it on the way down to Overland Expo East last year. I also have a tonneau that I use, so now I have the best of both worlds. :grin2:

Dan, how hard is it to install the soft top? I'm a old fat man and like easy. My T cover is a five minute job if I remove the bed clamps. I wish the made the soft in OD green.

 

[[email protected]]

Dan, how hard is it to install the soft top? I'm a old fat man and like easy. My T cover is a five minute job if I remove the bed clamps. I wish the made the soft in OD green.

It's pretty easy! Once the softopper is put together, you only have to tighten 4 bolts to fully secure it to the truck.

 

[USCGkyle]

First photoshoot with the 32's (255/75r17)

 

[markdibr]

@[email protected] i'd like to see a pic of the soft top

 

[ivance97]

First photoshoot with the 32's (255/75r17)

More pics please

 

[[email protected]]

@[email protected] i'd like to see a pic of the soft top

Post #548 has a somewhat close up shot, but here are a few more.

 

[markdibr]

That's super nice, i'm going to look that up myself

 

[USCGkyle]

More pics please

Here you go

 

[ivance97]

Here you go

Nice! How do you like that size? Anymore pics from the side or angles?

 

[Turns31]

Update:
Wheels came back last weekend. Updated pics with them installed plus a few other mods.

Sent from my iPhone using Tapatalk

Finally someone powder coated their ZR2 wheels. I'm definitely going to do it. Just needed to see it. Thanks a lot.

 

[388991]

DSC05878

 

[F8LZ71]

DSC05878

Looking good buddy! Is that with new leafs? Looks a little low in the rear.

 

[markdibr]

Update:
Wheels came back last weekend. Updated pics with them installed plus a few other mods.

Sent from my iPhone using Tapatalk

@papasmurf1958 looks great! check out colorlugz, you can get some black covers, pack of 20 for $12 dollars, less expensive option than black lug nutz. I bought two packs and works great, if interested.

 

[rtm03862iq]

View attachment 309401 View attachment 309385 View attachment 309361 added a few accessories and I get a lot of compliments about how nice it looks. New tires,wheels, black Chevy bow ties front and rear, cold air intake, took off the rock sliders and added running boards, flat black bug shield and window vents, tonneu cover with aluminum slats underneath it which you can’t cut it to get inside the bed, took off the spare tire underneath cause it made the truck look pregnant and put it in the bed. Tinted front windows, leveling kit for the front to even the stance out. Took of the chrome Colorado emblems and purchased black with a red outline emblem for all 3 locations. They made the truck look much better believe it or not just by doing that. It really stands out from other ZR2 Colorado’s. I do love it for sure. Also just added front headlights with LED driving lights and rear LED lights much better looking.

What size tires are you running?

 

[hoooogan]

My 2018 at the Apex Dunes in Las Vegas, last night.

 

[papasmurf1958]

@papasmurf1958 looks great! check out colorlugz, you can get some black covers, pack of 20 for $12 dollars, less expensive option than black lug nutz. I bought two packs and works great, if interested.

I have a set of black lug nuts too. The consensus was everyone around here liked the chrome ones better. I’m still missing two of them but I haven’t looked in my wife’s purse, lol!


Sent from my iPhone using Tapatalk

 

[Mark Praschak]

Blacked Out

Took delivery of my '19 ZR2 CCSB in March and went to work on it. First thing was door trim so I could take it to Walmart with confidence. You can get them from CarID.com, painted to match for $170. Good investment! Next was the gate badge so when they pull up behind me they know, and removed the ZR2 stickers from the bed.....lol. Then, it was AutoVentShade time with the hood protector and window treatments (get the ones that mount on the exterior and not IN the window channel!), LEGAL tint on the front doors and a set of McGard Wheel Locks. Then I dumped the factory air box and added the S&B Filters Cold Air Box so the little beast can breathe.....and it sounds badass, too. That should do me for awhile.

 

[Twin Magnolias]

New to me 2019 ZR2 atop Currahee Mountain of Band of Brothers fame. It came with the cap, and I've got a Rhino-Rack platform on order that'll hold my solar panel and foxwing awning.

 

[DB Cooper]

Here is my 2018 ZR2 I purchased new in Nov 2017. This picture is from a recent trip to Yellowstone. The truck has 589 Fab front shock spacers and a Peak suspension add a leaf spring in the rear. I also have the Boost towing mirrors, a Racor catch can, and a Pedal Commander.