Chevy Colorado & GMC Canyon banner
  • Hey Everyone! Enter your ride HERE to be a part of this months Ride of the Month Challenge!
1 - 1 of 1 Posts

·
Registered
Joined
·
968 Posts
Also need some weatherstripping for the tailgate like you mentioned.
I've been very pleased with the Lund weatherstripping, which received a lot of positive commentary in another thread. Take your time observing how the tailgate and body come together and think about where the adhesive should go and how it'll be stressed and compressed and you'll end up with good results. Mine seals up well without any abrasion or strain that is likely to pull it away from the metal. Go for compression with minimal rub, basically. The top corners of the tailgate are the hardest parts to work out.

https://smile.amazon.com/gp/product/B000COL4A4/
 
  • Like
Reactions: ZR2longhaul
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top