Chevy Colorado & GMC Canyon banner
  • Hey Everyone! Enter your ride HERE to be a part of this months Ride of the Month Challenge!
1 - 7 of 7 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter · #1 ·
I am wondering which take off rims would fit with no mods.

and I have an eye on some rims 6 lug Chevy but they are 15 inch. Will 15 inch fit? Mine are 16 inch
 

·
Registered
Joined
·
850 Posts
I would say they wouldn’t clear the brakes that small not too sure 16 is the smallest they come from the factory I have 17s in mine and clearance to the caliper lookes tight
 

·
Registered
Joined
·
5,016 Posts
I would say they wouldn’t clear the brakes that small not too sure 16 is the smallest they come from the factory I have 17s in mine and clearance to the caliper lookes tight
2011 Chevy Colorado Extended Cab 4 cylinder auto WT

Look at his sig:wink2:
 

·
Premium Member
Joined
·
3,688 Posts
2009-2012 need 16 or bigger to clear the brakes. Must be 6x5.5 lug pattern unless you use adaptors/spacers

Also the hub bore needs to be 100.3mm or more unless you use spacers. Silverado, Tahoe, escalade, ect ... take offs will need to have the hub bored out .
 

·
Registered
Joined
·
850 Posts
2011 Chevy Colorado Extended Cab 4 cylinder auto WT

Look at his sig:wink2:
Lol my bad so used to seeing second gen questions here.
 
  • Like
Reactions: RatRacer

·
Registered
Joined
·
1,250 Posts
Lol my bad so used to seeing second gen questions here.

You've got the Laser Blue Metallic - all is forgiven. :smile2:



Gusto!
 
  • Like
Reactions: greco2003
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top