Chevy Colorado & GMC Canyon banner
  • Hey Everyone! Enter your ride HERE to be a part of this months Ride of the Month Challenge!
1 - 3 of 3 Posts

·
Registered
Joined
·
5,016 Posts
Anyone have these with a 1 1/4" zone level kit?


Sent from my iPhone using Tapatalk
Pretty much wishful thinking with an almost 33" × 11.5 tire. You'll be rubbing on the frame/sway bar using the +33 offset factory wheels (see your previous post request about this). Folks moving up to 265/70 r17 rub the same ares with some brand tires, and rub the front of the wheel liners if they push the wheel out with adapters or less offset wheels. Others have tried 285/70 r17 with 3.75" lift and abandoned them to 275's.

Read through this thread, most have listed what they used/trimmed to make tires fit: http://coloradofans.com/forums/193-...uspension/202210-lifted-colorado-canyons.html
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #3 ·
Pretty much wishful thinking with an almost 33" × 11.5 tire. You'll be rubbing on the frame/sway bar using the +33 offset factory wheels (see your previous post request about this). Folks moving up to 265/70 r17 rub the same ares with some brand tires, and rub the front of the wheel liners if they push the wheel out with adapters or less offset wheels. Others have tried 285/70 r17 with 3.75" lift and abandoned them to 275's.



Read through this thread, most have listed what they used/trimmed to make tires fit: http://coloradofans.com/forums/193-...uspension/202210-lifted-colorado-canyons.html


Thanks, that's what I needed to know.


Sent from my iPhone using Tapatalk
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top