2020 Colorado, 6in rough county lift, 33in Cooper rugged trek, 18in KMC wheels, Fabfours bumper
-
Hey Everyone! Enter your ride HERE to be a part of this months Ride of the Month Challenge!
1 - 7 of 7 Posts
Joined
·
3 Posts
It looks good, my mesh inserts will go on tomorrow. They send me the wrong ones the first time unfortunately.
Joined
·
3 Posts
Thank you!Nice!
Joined
·
2,355 Posts
Looks good. Going to throw some fogs in the mesh pockets ?
Also, if you would allow me to make a suggestion, if you're planning on offroading I highly recommend the 589fab skid support bracket and a front skid since the front of the truck is now very open (great for airflow, bad for hitting things).
www.coloradofans.com
Front skid is the lower one (the non slotted one)
![Tire Automotive tail & brake light Automotive tire Grille Hood]()
Also, if you would allow me to make a suggestion, if you're planning on offroading I highly recommend the 589fab skid support bracket and a front skid since the front of the truck is now very open (great for airflow, bad for hitting things).
How-to: 589Fab Skid Plate Support Bracket Install
All, Obligatory not affiliated with 589fab, I bought all of this myself, none of it was provided to me, etc... Time required: 20-30mins Tools used: Rhino Ramps (makes life much easier) Gearwrench 15mm impact socket Dewalt 1/2 impact wrench Cheap rubber mallet Simple Green PB Blaster or WD40...
www.coloradofans.com
Front skid is the lower one (the non slotted one)
1 - 7 of 7 Posts
Join the discussion
