Chevy Colorado & GMC Canyon banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 34 Results
  1. 2nd Gen Tires, Wheels, and Suspension
    Being mulling over and researching a lift and I think I’ve come to the decision that if I do it I want to only go to a height that won’t require a differential drop. Based on everything I’ve looked at I think the best quality for the cost would be the Eibach Pro-Truck Lift System (Stage 1)...
  2. 2nd Gen Tires, Wheels, and Suspension
    I’m looking at upgrading from my 2inch level. I’ve been looking at a Peak or Eibach kit but I don’t know much when it comes to suspension. I do some mild off-roading, nothing too crazy and am currently running 265/70/r17 tires. If I do a kit with the front coilovers and rear shocks (3 inch in...
  3. 2nd Gen Tires, Wheels, and Suspension
    Happy Sunday people! (Go 9ers) I’d like to open this up to everyone: looking into real suspension lifts for the truck and I know that Icon is good stuff - considering the icon 0-4” kit and wondering what the maximum size tire I’ll be able to fit without rubbing on the stock wheels which I...
  4. Marketplace Classifieds
    Eiback front lift kit. Selling two front shocks and two front springs. All are brand new in box. I have had these for some time to replace my rough country level, but have not gotten around to it. Planning to lower my truck in the future instead. I will include free shipping to the lower 48.
    $400 USD
  5. 2nd Gen Colorado/Canyon Builds
    Hello everyone I recently bought this 2017 z71 colorado 2wd non turbo and was looking to lift 4" and I found some wheels on fb market place with tires for $600 the wheel specs are 17x10 -24 offset with a tire of 275 70r17 I'm wondering if I should make the purchase on the wheels this weekend or...
  6. 2nd Gen Tires, Wheels, and Suspension
    I am new to lifting trucks and can’t seem to easily find the answers I’m looking for. I have a 2020 Colorado LT 3.6l and regularly haul a 18ft bass boat. My in laws road is horrible and covered in boulders, mud pits etc. the driveway is a literal rock crawl lol. So to try and protect my truck...
  7. 2nd Gen Appearance & Body
    I have a 2016 duramax I’m looking for a level but wanna raise the back a tad and reinforce it a bit, with the RC 2 in front and add a leaf level it out?
  8. 2nd Gen Appearance & Body
    nevermind.
  9. 2nd Gen Tires, Wheels, and Suspension
    5 days after install and an alignment, my Bilstein 6112s are sitting at a 1.25" lift as measured at the wheel well. I set these up at 2" as according to the instructions. Checked and double checked, but the lift isn't there. Extremely disappointed. The add-a-leaf is dead on at 1.5". So...
  10. Marketplace Classifieds
    Selling my OEM shocks (less than 10K miles) and also selling slightly used 2inch spacers from rough country. everything came off my 2019 Chevy Colorado WT. Willing to ship at buyers expense. Asking $100 for everything. Located in Chino/Pasadena/Santa Ana areas.
  11. 2nd Gen Tires, Wheels, and Suspension
    I want to preface this by saying I have looked through the forum already and couldn't find any concrete advice for what I'm looking for. I have a 2016 DCSB Duramax that I bought a couple of months ago with an already installed Icon Stage 5 kit which includes front control arms, adjustable front...
  12. Marketplace Classifieds
    Eibach 1" rear blocks that were on my Colorado for about 2 months before I replaced the rear shocks, and an unopened Street Rays diff drop kit. Will ship, everything is in great (or new) shape.
  13. 2nd Gen Colorado/Canyon Builds
    So hello everyone I own a 2015 Z71 93k miles blk/blk I am looking to lift my truck. I would love all the feed back I can get! I am thinking of many options. Option 1: Pay out the nose for a top name company and in theory only getting minimal additional suspension replacement parts. (exp. Icon...
  14. 2nd Gen Tires, Wheels, and Suspension
    Hey, so I just got a brand new 21 colorado I’m new to the truck world but I’d like to get bigger tires with smaller rims. I’m aware I need a lift with the size I want to run. I’m thinking 275/70’ r17’s. Would doing a 3.25 inch lift fit that size and look good? Please be patient with me, I’m...
  15. 2nd Gen Tires, Wheels, and Suspension
    I'm looking at getting some 20x10 wheels. I have a four inch lift. What size tire will fit or should I go with? Thanks!
  16. General Truck Chat
    I have a 2006 chevy colorado 4x4. It curently has a roughly 3inch lift with keys and shackles. I like it but i kinda wanna be higher i thought about doing a lift kit since this is only a leveling kit. I need some opionions though on what yall think.
  17. 2nd Gen Tires, Wheels, and Suspension
    I did a quick search and didn’t see anything matching my question so here goes. I had an 05 Silverado with torsion bars as part of the front suspension. I had the keys turned to level out the front by a couple inches to fit 33” tires. I had a lot of issues with alignment and wouldn’t recommend...
  18. General Truck Chat
    Has anyone on here done the 2” strut spacer in the front and put in a 1” lift block in the rear? Just wondering what it would look like before I order the blocks! The truck looks level with the 2” up front but now with a small gap in the rear wheel well it looks squatted a bit.
  19. General Truck Chat
    I have 2” strut spacers in the front but now looks like it squats a bit. Would 1” blocks fix that, or would it give it a rake again?
  20. 2nd Gen Tires, Wheels, and Suspension
    I been banging my head against the wall on this.. I just installed the Eibach lift from Peak Suspension.. And so far I love it! But about a few days after, i got a knocking sound, first on the passenger side now I'm thinking it's on both sides.. Me and my friend did the lift and he's done a few...
1-20 of 34 Results
Top