Chevy Colorado & GMC Canyon banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 46 Results
  1. New Member Introductions
    So I bought my 2016 Colorado duramax LT 4x4 last March and since then have had a love hate relationship. Had the original transmission get warranty replaced and now it’s currently in the shop for a possible warranty replaced differential. She’s had 35,000 mostly highway commuter miles in this...
  2. 2nd Gen Colorado/Canyon Builds
    2016 GMC canyon and 6" lift kit. Gotten all the way to the knuckle installation and bam. NO WAY will that knuckle go in. The instructions say "Install lifted knuckle". No more. No mention of upper control arm drop kit in instructions. So I installed the knuckle and the drop of the front...
  3. 2nd Gen Tires, Wheels, and Suspension
    Happy Sunday people! (Go 9ers) I’d like to open this up to everyone: looking into real suspension lifts for the truck and I know that Icon is good stuff - considering the icon 0-4” kit and wondering what the maximum size tire I’ll be able to fit without rubbing on the stock wheels which I...
  4. 1st Gen Modifications - Suspension
    On my first gen I have a 4” touch country lift and my keys turned up 2” and a 1.5” lift shackle on the rear. About 6” front and 5.5” lift in the rear. I have been noticing a loud clanging noise when hitting any bumps on the road (not off roading). I had the truck re-torqued 500 miles after the...
  5. 2nd Gen Tires, Wheels, and Suspension
    I have a 2016 GMC Canyon SLT with a 4" Rough Country suspension lift. I recently bought the Supreme Suspension 0.5" lean correction spacer for my front driver side strut. I can't do the factory fix because the factory or dealer fix, is to put a shim on the leaf spring in the back, and since I...
  6. 2nd Gen Tires, Wheels, and Suspension
    I have a 2016 Canyon SLT and a few months ago I had installed a 4" rough county suspension lift. Didn't notice the lean unit a few weeks ago, called RC and they sent out replacement struts, and I replaced the driver side strut but the driver side still seems to be sagging a bit. I did just...
  7. 2nd Gen Tires, Wheels, and Suspension
    Anyone have experience with this lift kit? It says 2WD only but I’ve seen it installed on 4WD as well. Does it matter? What are your thoughts on the kit? Should I go with coil overs as well?
  8. 2nd Gen Tires, Wheels, and Suspension
    https://www.roughcountry.com/gm-combo-lift-kit-924.html
  9. 1st Gen Modifications - Suspension
    I'm looking for the best bang for your buck when it comes to lift kits for my 2012 colorado 4wd. i would like to do a 2.5 or 3 inch. any luck with the rough country kit? I'm not looking to spend $335 at badlands for a 3 inch kit. thnk you
  10. Marketplace Classifieds
    For sale: 100$ as set plus shipping 1. Un-used 1-2" lift adjustable rear shackle 2. Un-used Maxxcam Jr adjustable torsion key with diff drop spacers, shock extenders (all hardware). up to 3" lift. I was going to put these on my 05 colorado Z71 but decided to just keep it stock. Any questions...
    $100 USD
  11. 2nd Gen Colorado/Canyon Builds
    I have a 2007 gmc canyon 2wd, and i’m in the market for a 6-8” lift but cannot find any over 4” can someone please point me into the right direction as to where i can find one or if i should just stick with doing the 4” kit, 3in leveling kit, and 3” body lift
  12. 2nd Gen Tires, Wheels, and Suspension
    I have a 2017 Colorado and I was thinking about getting an Eibach Pro-Truck Lift Kit and I wanted to run the front at 3 inches and the rear 1.5 inches. Would I also need to get extended sway bar links and longer brake lines in addition to a diff drop? Also, are upgraded UCA's recommended for...
  13. 1st Gen Modifications - Suspension
    I installed a rough country 2.5” lift on 2007 Colorado 4wd, it uses a spacer on the torsion bar bolt so I’m pretty sure it cranks the keys. If I get Zone aftermarket keys that are supposed to give 2” of lift, will I only get the 2” of lift or will I get 4.5” from combined lift of 2.5” from the...
  14. 2nd Gen Tires, Wheels, and Suspension
    So I currently have a 2inch lift kit but have been wanting to upgrade it. I lift trucks for a living and have been wanting to do something crazy. I’ve been thinking about putting a 6inch RC lift on my colorado, stacked with a 1.5inch lift kit, and then a 1.25 inch body lift kit. I know this is...
  15. Marketplace Classifieds
    Hey y'all. I'm looking for stock suspension components. I want to remove the 6" lift that is on my Canyon and get back to stock tires. MPG's are killing me. I'm in upstate SC.
  16. 1st Gen Modifications - Suspension
    2007 with RC 2.5” lift which uses a spacer on the torsion bolt adjuster to achieve lift, if I get smaxx torsion keys that are supposed to give 1-3” of lift will I still get that lift with the spacer on the adjuster bolt
  17. 1st Gen Modifications - Suspension
    Hey guys I have a 2012 chevy colorado crew cab with the 5.3L. I have been looking everywhere to see if there is a 3 inch body lift kit for this truck. Haven't found anything. Is there another kit that will work? Or is it just not possible to do a 3 inch on this truck???
  18. 1st Gen Modifications - Suspension
    I have 2007 Colorado 4wd and I could get a 4” knuckle lift for just over $1500 or I could get a 2.5” leveling kit and then a 1.5” body lift for the same amount of total lift but for like 1200 cheaper. Is there any reason why I wouldn’t want to install body lifts?
  19. 2nd Gen Tires, Wheels, and Suspension
    So I am new to modifying trucks but I have a mechanical and engineering background. I am looking at adding a 2" RC spacer leveling kit to my 2017 z71 and a 1" block in the rear to lift the truck but not totally eliminate the rake. My Dad has about 20+ years working on vehicles and he's under the...
  20. New Member Introductions
    Hi everyone, I’m new to this forum and I recently bought a canyon AT4. This is my first truck and so far I love it. The first thing I did was take off the front air dam but I’m looking to make some more modifications. Since this is a newer model I’m having trouble finding examples of potential...
1-20 of 46 Results
Top