Chevy Colorado & GMC Canyon banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. 2nd Gen Tires, Wheels, and Suspension
    New to this forum. Sorry if the answer to my question is obvious, I know very little about this stuff. I had an accident at the beginning of the year and the front driver side wheel was broken off completely. The repair shop repaired everything and when the truck was returned the front driver...
  2. General Truck Chat
    hi everyone. just joined to make this thread. i was replacing a power steering line on my rack and pinion a while back. The small bolt holding the lines on broke. So I would up pulling the entire rack and pinion and eventually got the broken bolt out. I pulled the tire rods out of the knuckle...
  3. 1st Gen Care - Cleaning / Detailing / Maintenance
    After I got my alignment, my 05 canyon started to squeal as if it was out of alignment. I checked the toe with toe plates and it had a toe out of 1in. This was over the span of 1 month and two alignments. I have installed re indexed torsion keys, 3in fabtech spindles, new Silverado inner tie...
  4. 2nd Gen Colorado/Canyon Builds
    Hoping someone can shed light on this, I have a 2016 Colorado 4WD. I put a RC 4" suspension lift in the front and left the rear stock. Sits about 2" higher in the front. I put 33x12.5x20's with -18mm offset and had to use 1/2" BORA spacers for the wheels to clear the calipers. ISSUE: We cant get...
  5. 2nd Gen Tires, Wheels, and Suspension
    I really should know this answer but I have to ask ,, I just had an 2" Pro-Truck Lift Springs and Pro-Truck Sport Shocks installed in my 2019 GMC Canyon , mechanic (Who was highly recommended by many people I know did an excellent job for a fair price . Heres the problem ,,, he said I did not...
1-5 of 5 Results
Top