Chevy Colorado & GMC Canyon banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. 2nd Gen Engines and Technical Discussion
    Is there any way to purchase the connector on the main harness end for the drivers side tail lights? The part you would plug into the tail light wire harness. If so what would that be called? Or better off going to junk yard? One of the wires is frayed where it goes into the connector. Not...
  2. 2nd Gen Engines and Technical Discussion
    Hello everyone! I moved this summer to a new part of FL and don’t have my trusted mechanic around, so I took my 2015 Canyon CCLB to the local dealer for an oil change and to make an appointment for a few other issues I’ve been having (which will be in another post to ask y’all about). I was told...
  3. 1st Gen Accessories & Aftermarket Products
    I have been doing a brake job on my 08 4wd Colorado and found there was no brake backing plate on my driver's side front. I have seen many names for this part (brake dust shield, backing plate, etc) but when I find some and try to add my vehicle to see if it matches, I cannot find anything. Does...
  4. 2nd Gen Tires, Wheels, and Suspension
    Hello all, I bought this truck used and I'm now coming up on 40K miles. I recently have noticed a screeching sound, but it only happens periodically and usually after I have been driving for a bit. I also believe/noticed it most when I'm turning the steering wheel and slowing down (through a...
  5. 2nd Gen Tires, Wheels, and Suspension
    Just took delivery of my 3rd Colorado (2021 ZR2) and was disappointed to discover GM has downgraded the front brake to a sliding 2-piston slider from the earlier fixed 4-piston caliper. The truck for SURE stops worse than my '15 and '18...and 2-piston sliders just look like garbage. Anyone...
  6. 2nd Gen Engines and Technical Discussion
    All, Why does the ACDELCO service manual say to bleed brakes in the following order ? 1. RIGHT REAR 2. LEFT FRONT 3. LEFT REAR 4. RIGHT FRONT I've bled brakes before, but usually in the "furthest from the Master cylinder and work closer" order (right rear, left rear, right front, left front)...
  7. Technical Questions / Tips / How To
    While I'm working on a serious issue, the brake lights stopped working. Can someone tell me quickly WHERE the BRAKE LIGHT SWITCH is located? (I checked the fuse (HOPING). Nope. Fuse good. RATS!)
  8. 2nd Gen How-To & Tutorials
    Hey All, Im trying to put in a control module for trailer brakes on my 2015 Colorado but having trouble finding the wiring under the dash. I do have a factory towing package. Can anyone help me put on where the wires are?
  9. 1st Gen Modifications - Performance
    The brakes on my Canyon are begging to be replaced. The only kit I could really find is a Power Stop Z36 front and rear brake kit but I've never even heard of the brand. Does anyone know of any decent brake kits?
  10. 2nd Gen Tires, Wheels, and Suspension
    Hello, this is my first time posting on this forum and I am not too sure where else to turn. I do not have any experience fixing or working on vehicles so, please bare with my descriptions. I have a 2017 Z71 Colorado Midnight Edition with around 32K mileage. I have 2 frustrating noises that...
  11. 2nd Gen Tires, Wheels, and Suspension
    Does anyone or has anyone ever had a similar problem with their 2nd Gen Colorado or Canyon. I have a 2017 Colorado Z71 with a approximately 2" lift, and often times when I am driving around I feel as if the body moves one way while the suspension moves the other way. Sometimes at high speeds...
  12. 1st Gen Care - Cleaning / Detailing / Maintenance
    Hey All - I created a write-up for doing a wheel hub/bearing, brakes and the differential seal on the gen 1 Chevy Colorado's & GMC Canyons. I wanted to give back to the community as I am fairly new to the Colorado itself, but I know lots of little tricks from other cars I have worked on that I...
1-12 of 12 Results
Top