Chevy Colorado & GMC Canyon banner

Search results

1-20 of 170 Results
Advanced Search
  1. My truck have broke 4 mufflers why?

    1st Gen Modifications - Performance
    Hi: Actually I install a round muffler, is very quiet and until now is not vibrating, this muffler is huge is used in V8 trucks and vans as well, the muffler shop also install a new hanger below the pipe to reduce the forces on it. Later I will post some pics, the problem has been resolved...
  2. Security Ligth is on?

    General Truck Chat
    Hi: I getting the security light on very constantly, sometimes it blinks I really don't know why and what to do to fix the problem. I have disconnect the battery and it seems to resolve the problem for a while then it appears again. Is a way to disable the passlock? What could it be? Mine...
  3. Security Light Problems

    Technical Questions / Tips / How To
    Hi: My truck is a 2006 crew cab, with almost 80,000 miles and For a few weeks ago I'm getting the security light on, it just stay on in my dash and on my next motor start is off, but yesterday it comes on and began to flashing, after a few minute it comes off by it self. What may I consider...
  4. Rear Shackles & Front Spacers damage my suspension!!

    1st Gen Modifications - Suspension
    Thanks for answer But my question is, is a must to do it right away, an emergency or I can take it relax, use the truck and re-align on monday just to say a day!! I can use the truck like this or is not recommendable? Victor
  5. Rear Shackles & Front Spacers damage my suspension!!

    1st Gen Modifications - Suspension
    I'm planning to quit all the lift parts tomorrow, I must have to take the truck for alignment again? By the way if anyone is interested I'm selling all lift parts: 2'' Bubaloo shackles 2'' front shock spacers, with shims, bump-stops extensions and all the screws needed. For price PM or email...
  6. Rear Shackles & Front Spacers damage my suspension!!

    1st Gen Modifications - Suspension
    Hi: Of course it was aligned!! For DaveZ71 mine has 74,100 miles. Victor
  7. Rear Shackles & Front Spacers damage my suspension!!

    1st Gen Modifications - Suspension
    Hi: I have a 2006, Z85 2wd, crew cab truck. I install 2'' bubaloo shackles at the rear end, in the front I install 2'' shock spacers. Then I put some 31x10.5 tires, well its looks great as hell, It was about 2.5 years ago, Now I have the followings problems: Last week I have to replace due a...
  8. My truck have broke 4 mufflers why?

    1st Gen Modifications - Performance
    Thanks for answer, Well this is not my case unfortunately, I'm vendor and I'm driving all day long!!, Turning my motor on and off every time I visit a customer, proximately 10 customer daily. That's why I don't know if is a good option to drill it!! Victor
  9. My truck have broke 4 mufflers why?

    1st Gen Modifications - Performance
    Who else think I must drill it?
  10. My truck have broke 4 mufflers why?

    1st Gen Modifications - Performance
    Hi: Something that I can add to this thread is that my truck deliver/create/generate whatever!! by condensation a lot of water from the exhaust pipe some guy told me it is one of the reason for the corrosion, If I'm not wrong the original muffler comes with a little hole below to drain the...
  11. My truck have broke 4 mufflers why?

    1st Gen Modifications - Performance
    Hi: Every muffler shop that works with my truck do all this checks, because I told them the whole story to see if they can help me. To prove is the muffler the turn on the truck, put it in drive, them with the break pressed began to accelerate, the man below the truck do the check up and...
  12. My truck have broke 4 mufflers why?

    1st Gen Modifications - Performance
    Hi: I have visited 3 different mufflers shop!! I really don't know what is missing or else!! Victor
  13. My truck have broke 4 mufflers why?

    1st Gen Modifications - Performance
    Hi: My truck is a 2006, 2wd. Crew Cab 5 cyl. 3.5lts. Well I changed my original muffler when it has about 15,000 miles my first muffler was a 2.5 dia. dynomax super turbo, it takes just 3 months when it began to rattle at low speed specially at 1k to 1.5k rpm. My second was a Flowmaster, it...
  14. center support bearing

    Technical Questions / Tips / How To
    Hi everyone: Does anyone knows if install a lift kit at the rear end, to be specific 2'' shackles can affect or may broke the center bearing support of the propeller shaft? I have never heard something about it but; I install a 2'' Bubaloo shackles on my Z85 crewcab, 2wd, after that the truck...
  15. center support bearing

    Technical Questions / Tips / How To
    OMG!!! Its really more difficult that I tough !!!! I will have to take it to the mechanic, I can't do it by myself... Thanks Victor
  16. center support bearing

    Technical Questions / Tips / How To
    hello: Mine is also broken, that's why I'm having a lot of vibration in the drive shaft. I either find it on the web, with the gm part number posted here in gmpartsdirect.com for $61.46. But anyone has found more resources? Is recommended to change the u-joints too right? Now my question...
  17. Help on intake

    1st Gen Modifications - Performance
    No, I'm from Puerto Rico Very far from LA, but thanks any way. Victor
  18. Help on intake

    1st Gen Modifications - Performance
    hi: Yes that's what I want.. Now I have a better idea of how to cut out the pipe without damage it! Thanks Victor
  19. Help on intake

    1st Gen Modifications - Performance
    Hi: I think there's something wrong in my question. When I'm talking about the 3'' pipe I'm talking about the one that comes from the throttle body through the mass sensor. If I buy the 3'', 45 or 90 degree PVC pipe is too long, so the exact measure is cut the pipe by the half or is an specific...
  20. Help on intake

    1st Gen Modifications - Performance
    Hi: I know this is an old tread, but by the way the plan is awesome. Looks cool and must be great in performance. All I want to know is if the 3'' pipe has to be cut by the half to fit, the bigger end has to be cut also right? PD. Any idea to make the stock filter box enter more air from the...
1-20 of 170 Results
Top