Chevy Colorado & GMC Canyon banner
Kokiri

Reaction score
372

Profile posts Latest activity Discussions Media Albums About

  • Infidelophile ·
    So far just the one scratch that my boy put in it and a little bit of wind wear on the front bottom corner of the bumper. I'm gentle when I wash it which works out because it usually cleans nicely with just a spray of water.
    Tilley ·
    I had the factory flares before I had the EGR's... but I took the EGR's off because I wanted a wider "stance" and the flares covered up too much of my tire for what I was wanting.
    Mewn ·
    It is stainless polished steel and it is molded into the hood. It is fairly durable as the hood I bought on my Fullsize GMC back in 2011 is the same material and its still looking good.
    missotis ·
    kokiri
    I uploaded pictures on my gallery ( Ed's Red) if you want a different angle or further away let me know
    Ed
    missotis ·
    Kokiri
    just saw your truck on your "contrast" posts. it looks great, i really like what you have done to it. I will send you my pictures on Friday when I get my truck back. in the meantime look at this ebay item which would look great on your truck SUPER SHARP CHEVY BLACK&CHROME 2.56" DOMED CENTER CAP STICKER DECALS. talk to you later
    Ed
    missotis ·
    sure, no problem. I will take a picture as soon as I get the truck back, it's getting cquartz finest treatment and will have it back Friday.
    Ed
    missotis ·
    Kokiri
    I got the stickers on ebay NEW CHEVY STYLE 2 9/16" RED&BLACK & RED DOMED BOW TIE Center Cap STICKER DECALS ( 322138615364 ). they are not cheap but dome stickers tend to run higher and they are good quality with 3m adhesive backing. They have all different sizes of stickers but the 2 9/16" are closest to the Collie's 67mm center caps. Have different styles if you want Black with chrome etc. Nice product...have wash my truck a couple time with high powered spray and they still are on
    Good luck
    Ed
    Blue15ColoradoLT ·
    i used VHT caliper paint system (primer, paint, clear coat). Once the wheel is off, it took about 5 minutes to clean the caliper (short amount of time because of how new the truck was when it was done). I did front calipers one weekend and then the rear calipers the following weekend.

    Once I got into the paint process it went:

    Primer:
    layer 1 driver side
    layer 1 passenger side
    wait 10 minutes
    layer 2 driver side
    layer 2 passenger side
    wait 10 minutes
    layer 3 driver side
    layer 3 passenger side
    wait 1 hour

    Paint:
    layer 1 driver side
    layer 1 passenger side
    wait 10 minutes
    layer 2 driver side
    layer 2 passenger side
    wait 10 minutes
    layer 3 driver side
    layer 3 passenger side
    wait 1 hour

    Primer:
    layer 1 driver side
    layer 1 passenger side
    wait 10 minutes
    layer 2 driver side
    layer 2 passenger side
    wait 10 minutes
    layer 3 driver side
    layer 3 passenger side
    let dry/cure over night (truck was in heated garage)
    chevy626 ·
    Yes same thing only thing is plasti dip gives more of a textured look from what i saw the flexi dip lays flat not much of an orange peel.
    chevy626 ·
    Used this it was the easiest thing i ever painted full idiot proof!

    Rust-Oleum FlexiDip 11 oz. Black Spray Paint-276289 - The Home Depot
    CanyonWizard ·
    I beat the main story of it and still have a bunch if side missions and tombs to explore. The graphics are absolutely phenomenal and I have to say, this is the best game I have played in a long time. I loved it so much that I bought the last game that came out a couple years ago for xbox one. If you liked the old ones, you would love the new one! Have you played Nathan Drake? I have been tempted to get it for the ps4 since I loved tomb raider so much and I have heard it is similar.
    Blue15ColoradoLT ·
    I used these for the fogs:

    Search on Amazon: GENSSI 5000K LED Kit Headlight Conversion Kit CREE LED Bulbs HID Replacement (9005 HB3)

    Then just change to the H16 (5202) bulbs

    very nice and bright
    Blue15ColoradoLT ·
    I went with the DDM Tuning Ultra 55W 5500k HID set up with the error code eliminators. Took me 5 minutes to install.

    DDM Tuning: HID and LED Lighting
    Blue15ColoradoLT ·
    I have these bulbs:

    Amazon.com: GENSSI 5000K LED Kit Headlight Conversion Kit CREE LED Bulbs HID Replacement (9005 HB3): Automotive

    H11s in low
    9005s in highs
    5202s in fogs.

    They actually work better in a reflector setting than the projectors. With them in the fog lights, they throw so much better than my low beams. With just the low beams, I get a crisper light than the halogens, but not an improvement in throw. I actually have to put my fog lights on the generate a decent amount of light in front of me.

    earlier today I installed some 55W HIDs in my low beams so I'm going to test the waters with those as well and see what gives me the best.
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top